CAVS JB-99 RS II Karaoke Jukebox

Version 3.0 UN1290

CAVS JB-99 RS II karaoke system will arrive in a pallet carrying 3 items (1 wooden crate and 2 boxes).

1. Wooden Crate (1/3)

In the crate, you will find

2. Box 2/3

3. Box 3/3

From the boxes 2 and 3, find the following parts.

Assembly

  1. Unfold the Monitor Stand.

    The arm is generally stiff and requires firm but gentle pulling.

  2. Separate the Mount bracket into two parts L-base and Movable plate.

    The Movable plate has the JB-199 mini II mount plate attached.

  3. Place the touch screen monitor in the styroform case as shown. Watch for the orientation of the monitor and the case.


  4. Attach the monitor stand and L-base plate onto the touch screen monitor as shown using the 4 screws.

    Be sure the monitor stand is in-between the touch screen monitor and the L-base plate.
    Watch for the orientation of the L-base plate.

  5. Standing the monitor and the monitor stand upright, attach the Movable plate onto the L-base plate. Watch for the orientation.

  6. Place the swivel plate on top of the JB-99 RS II kiosk using 4 screws. Watch for the orientation.


  7. Place the monitor and monitor stand on top of the swivel plate using 4 screws.


From the box 2, find the JB-199 mini II karaoke player.

Depending on the shipment, the JB-199 mini II karaoke player may already have USB dongles connected. Remove and set aside the dongles for now as they will be reconnected later.

The JB-199 mini II player will have two protruding screws at the bottom as shown in the picture.

Connection

  1. Attach the JB-199 mini II karaoke player onto the back of the touch screen monitor, onto the back plate of the JB-199 mini II. Watch for the orientation.

  2. There are four cables (AC Power plug, 3.5mm jack, USB-A, and DC power plug) at the top of the kiosk as shown in the picture.


    Connect the AC power plug to the touch screen monitor, DC power plug to the JB-199 mini II player, and USB plug to the JB-199 mini II player as shown in the picture.


    Connect the 3.5mm jack to the JB-199 mini II as shonw in the picture.


  3. Next using the enclosed Display Port to HDMI converter and a HDMI to HDMI cable, connect the Display Port of the JB-199 mini II player to the HDMI port of the touch screen monitor. Using the enclosed USB cable, connect the USB-B end of the cable to the touch screen monitor and USB-A end of the cable to the karaoke player.


  4. The connections you need to further consider are a LAN cable for Internet, a HDMI cable for an external TV, and a dummy HDMI plug.

    For song subscription services, the LAN cable with Internet access must be connected to the RJ45 port on the JB-199 mini II player.
    For an external TV, the HDMI cable from the TV must be connected to the HDMI port of the JB-199 mini II player.
    And when you are not connecting an external TV (or a second monitor), the dummy HDMI plug must be connected to the HDMI port of the JB-199 mini II player.

    NOTE: When changing the configuration between connecting an external TV not, you must close the karaoke program before switching the HDMI connectors

    Note: The Wi-Fi adapter of the JB-199 mini II player is configured to automatically connect to a network router inside the kiosk. And this network router is set for the devices such as phones and tablets to connect to the plaerer for the customer interface where the songs can be selected and played. The devices can connect to the network router simply by scanning QR codes which are enclosed.

  5. Lastly the red USB security dongle must be connected to the JB-199 mini II karaoke player as shown.

    • The red secuurity dongle must be connected at all times. It is a security lock for the karaoke player.

    • The black dongle is for the remote controller.

      It comes inside the remote controller box.

    • The blue dongle with a flap is for the wireless mouse and keyboard.

      It comes inside the mouse battery compartment.

      Since there is no more USB port on the JB-199 mini II, a USB hub or switch is needed to connect additional USB drives. The black dongle of the remote controller can also be replaced by the blue dongle of the wireless keyboard and mouse.

From the work above, the JB-99 RS II karaoke player will appear as shown.

There are now a few things left to tidy up around the kiosk.

Standing in front of the kiosk, search the right side pouch.

You will find

  1. Attach the microphone holder x 2 with enclosed screws on the side of the kiosk as shown.

  2. Connect the AC power cable to the power plug at the back side bottom of the kiosk.


  3. Use the key to open the bill acceptor compartment on the right side and the speaker compartment on the back side of the kiosk.



  1. Power on
    Connect the AC power cable of the kiosk to a wall outlet.
    The LED lights for the amplifier, the bill acceptor, and the microphone receivers will turn on.

    Next turn on the touch screen monitor and the external TV, if connected.


    Lastly turn on the JB-199 mini II player by pressing the power button as shown.

    You can use the touch screen monitor, remote controller, or the wireless mouse & keyboard to operate the karaoke player.

  2. Shut down
    Using the remote controller or the wireless mouse & keyboard, initiate the shut down in Windows inside the JB-199 mini II karaoke player.
    Wait for the JB-199 mini II player to shut down completely, and then unplug the power cable from the wall outlet.

  3. Microphones
    Open the microphone box and you will find 2 handheld microphones as shown.

    Insert the AA batteries into the microphones and turn on the power switch.


    Test the sound and adjust the volume, echo, and reverb levels at the amplifier located on the back of the kiosk.

  4. Karaoke Player
    To select and play songs, refer to the User Manual at JB-199 mini II User Manual
    Read Section 6 and 7 in particular. You will also find detail descriptions on how to enable subscriptions, bill acceptor, recordins, etc. in the JB-199 mini II player.

    Test the music playing and adjust the sound using the amplifier located on the back of the kios.

  5. Audio Ouput
    An award winning CA-242RA amplifier provides professional karaoke sound in JB-99 RS II system.
    The controls are located at the back of the kiosk as shown above, away from the customer's reach.
    Be sure not to overload the sound system by going higher than 3 o'clock with the master volume knob. It would likely result in blowing out of the amplifer or the speakers.

    To connect to an external audio system, find an output RCA (red and white) cable at the back of the kiosk.

    Connecting additional speakers directly onto the CA-242RA amplifier is not recommended as it will more likely cause blow-out of amplifier or the speakers when playing aloud.

  6. Cassette Recorder
    Currently there is a cassette recorder embedded in the kios as shown

    It is disabled and replaced by the digital recording feature inside the JB-199 mini II which allows for automatic parsing and instant download.
    Go to JB-199 mini II User Manual for detail instruction.

END